To use the Niligo app, you must first install it. To do this, go to the following URL to get the latest version of this app.

Continue the installation process and open the app.
You should be in the app environment and it is time to configure smart devices. Due to the iOS security settings and the lack of access to the APIs, the following steps should be taken carefully.

To add a new device, select Configure New Things from the main menu. This will bring you to the new device setup screen.

On this page, you must enter the router name, password of the Wi-Fi network and select an appropriate name for the new device. For example, if you want to use a Niligo Smart Bulb in the bedroom, Bedroom can be a good option.
Note that password should only include A-Z characters large or small, and 0 to 9 characters. If not, please change your Wi-Fi password.

Press the Continue button to continue the process of adding the new device.

You must manually connect to the device first. To do this, choose the name of your preferred device from the list of available Wi-Fi networks, which is started by default with the term Niligo.
Remember that the successful connection should end up with showing a network with device name in the list of connections. After successful connection to the device, press the back button to return to the application environment.
Wait a few seconds to for a message telling you that the device is added successfully and if the device is a smart bulb, it will blink red, green.
Repeat above steps to add other smart devices.

You can configure added devices now. To do this, just press the device icon to enter configuration page.


You can control each of the smart devices individually or control all of them together.
Each device may have its own control environment. So, in spite of the general consistency, you can handle a smart key, motion sensor, or smart lamp with different options.
We will continue to control the Niligo Smart Light.
The controller has many parts. This page can be divided into three sections, which are heather, control, and footer respectively.
There are three options in the heather for adding to favorites, adding a timer and a camera button that will be dealt with later.
As the control section name indicates, it is used to apply the settings. You can adjust the color of the lamp with its intensity and temperature.
In the footer menu, you also have access to the devices and bulbs added to the app to control them individually or collectively.


Wheel tab

You can use the color wheel to control the color of the lamp. Niligo’s Smart Bulb supports up to 16 million colors, which can be easily selected through the wheel.
Tap anywhere on the wheel and you will see the selected color. To apply a color, just click the Enter button.
There is also a separate button to turn off the smart bulb.
Remember that proper connection to network is displayed as a green Wi-Fi icon next to the on / off button.
Use the bar to adjust the intensity of light. Setting the intensity to the minimum is the same as setting it off.


RGB tab

The RGB tab controls red, green, and blue. By combining these colors, you can create any color.
The last bar is intended to adjust the intensity of light.


Kelvin tab

Kelvin is the light temperature unit which is used in the Niligo app for the same job.
There are three bars on this page to adjust yellow, white and intensity respectively.


Settings tab

In this tab, you can return the bulb to the factory settings, update the firmware, change the name of the device, or put a password on it.
Return to factory settings: By selecting the Reset button, the bulb will return to factory settings. To do this, select Ok in response to the message shown, or press No to cancel.
Renaming the device: To rename a device, just enter the new name in the desired field.
Changing Password: If you do not want anyone to access the Smart Device Settings, you can protect it with a password. This password is only for local use.
To change the password, you must first enter the current password in the first field and enter the new password in the second field.
If you have not already entered the password on the smart device, use admin as both username and password.


Apply changes to all devices

To apply any of the variations of color and intensity at the same time to all the lamps, you can put the situation in the bottom menu on All and apply the desired settings.


Save settings and add to favorites

You can save any combination of color and intensity to favorite list for later use. It is possible to do this in either RGB, Wheel or Kelvin tab.
Just click the Add to Favorites button to save the settings.
If you want to save the settings for the first time, you will see an empty list of favorites. Press the Add button to save the first combination.
Now the combination is added to the list and displayed as an icon.
To delete the saved settings, press the delete button. This will show a trash mark on all saved colors. You will now remove it by pressing the trash icon on any of the colors.


Setting the color from an image

If 16 million colors is not enough, the good news is you can choose color from any image.
for example, if you want to paint your room to colors of a beautiful sunset, just press the camera button to choose a color from an image in the gallery or by launching camera and taking picture.
More security, remote control, saving data, analyzing and sharing data are some of the most important benefits of cloud service.


Niligo Industrial Internet of Things
Android user manual
Menu